Video Keyer Submodule Jumpers - evertz 4025 Instruction Manual

Figure 6-7: 6231 Versions Video Keyer Sub-module Default Jumpers
TECHNICAL DESCRIPTION
they change mid-frame, this method will track the film frames to within 1
frame of accuracy.

6.3.6. Video Keyer Submodule Jumpers

JPA1 Digital Key
JPB1 Digital Key Fill
JPC1 Analog Key
JPD1 Analog Key Fill
JP2
JP3 Config Select
JP4 Bitrate Select
JP6 Hsync
JP7 Vsync
JP8 VITC/CHAR Select
Model 4025 Film Footage Encoder Manual
Install for Digital Video Out
Install for Digital Video Out
Installed Install for Analog Video Out
Installed Install for Analog Video Out
Board link Installed
LO Selects Character generator function of 6231
This is the default for use on the 631
Character generator module
HI Selects VITC generator function of 6231
This is the default for use on the 615
LTC/VITC generator module.
SEL Firmware selection of Character or VITC
function of 6231
Board Link
Open HSync from main board
Open Vsync from main board
A Auto select of VITC/Char oscillator to LCA
C Selects Char oscillator to LCA
V Selects VITC bitrate oscillator to LCA
Page 6-11