Table of Contents
Advertisement
OPERATION
the generator 1 Time highlighted. Use the
the generator time window on the screen. Press the CHAR GEN ON / OFF
key to turn the window on or off. Press the MODE key again to select the
next window. Use the
the window to the desired location and turn it on or off.
remaining windows using the MODE key until all four windows are where
you want them on the screen. Press the MODE key one more time or
press the CLR key to exit the VCG window select mode.
The 4025 can position the characters in the vertical interval of the picture,
causing them to 'disappear' or to overwrite the VITC. Caution should be used
when placing the characters in the vertical interval.
3.12.2 Positioning the Overall Character Display
In the normal display mode, when none of the windows are highlighted, the
four arrow keys ( ,
same relative amount.
KeyKode windows both down by one line press the
the Time window down, leaving the KeyKode window in the same place,
press CHAR GEN MODE key and then press the
key to return to the normal display mode.
3.12.3 Selecting the Character Size
Selection of the character size is performed using the Format menu
displayed on the character generator. Press the FORMAT key to access
the Format menu. Using the
Use the
&
SELECT key to show the Character size sub menu. The currently selected
character size is shown in reverse video. Press the
more times to select the desired size. Press the FORMAT or CLR keys to
exit the format menu, or press the SELECT key to return to the CONFIG
drop down menu.
The TINY character size occupies 8 lines per field for each character row.
This permits 28 vertical positions on the raster in NTSC or 32 in PAL.
The SMALL character size occupies 16 lines per field for each character
row. This permits 14 vertical positions on the raster in NTSC or 16 in PAL.
The LARGE character size occupies 32 lines per field for each character
row. This permits 7 vertical positions on the raster in NTSC or 8 in PAL.
3.12.4 Selecting the White or Black Characters and Turning Off the
Background
Selection of the desired style of the character display ( black or white
characters, with or without background) is performed using the Format
menu displayed on the character generator. Press the FORMAT key to
Model 4025 Film Footage Encoder Manual
,
,
,
keys and the ON / OFF key to move
,
,
) move all the displayed windows by the
For example, to move the generator time and
&
keys to highlight the CHAR SIZE menu item and press the
,
,
,
keys to position
key. To move only
key. Press the CLR
keys drop down the CONFIG menu.
&
Select the
keys one or
Page 59
Advertisement
Table of Contents
