Engineering Tool Box Menu - evertz 4025 Instruction Manual

TIMECODE
GEN MODE
RUN EDGE
CINE NUM
CINE EDGE
RDR1 EDGE
CINE RDR2+KEYKODE
RDR1 RDR2+KEYKODE
CINE 3 LINE VITC
RDR1 3 LINE VITC
VITC1 LINES
GEN VITC1 LINES
LINE1-10 LINE2-20
VITC2 LINES
GEN VITC2 LINES
LINE1-10 LINE2-20
DROP FRAME
NON DROP FRAME
DROP FRAME
NOT AVAILABLE
JAM RDR1
RDR ASSIGN
R1: AUTO R2: OFF
R1: LTC R2: VITC
R1: VITC R2: LTC
HARDWARE
HORZ CHAR SIZE
OPERATION
FILM
KK JAM
NEVER
ONCE
PLAY
ALWAYS
KEYINFO
INFO OFF
INFO ON
INFO CHECK
FILM TYPE
35 MM 16 FR/FT
16 MM 20 FR/KEY
16 MM 40 FR/FT
FILM RATE
24 FRMS/SEC
30 FRMS/SEC
AUTO 24/30
25 FRMS/SEC
EDGE STYLE
GENERIC
EVERTZ
EDGE FORMAT
4 DIG FT + FRM
5 DIG FT + FRM
6 DIG FT + FRM
7 DIG FT + FRM
Figure 0-8: Overview of the 4025 Format Menu System
3.2.1

Engineering Tool Box Menu

The Toolbox menu allows the advanced user to change various internal
parameters of the 4025, or to invoke several advanced diagnostic modes.
This menu should be used by advanced users only, as improper use can
overwrite KeyKode Head offsets and other user setups.
The 4025 Toolbox menu system consists of three drop down menus. The
titles of each of the drop down menus are shown on the top line of the
character display.
reveals a sub-menu showing the choices for that item. Figure 0-9 is an
overview of the Toolbox menu and shows all the menu choices and where
you will find the menu items. Note that some menu choices will be hidden
depending on the programmed mode of operation.
The HARDWARE pulldown menu is for hardware related adjustments such
as selecting the telecine type and bi-phase rate, adjusting the VCG
horizontal character width, the front panel display brightness, resetting the
4025 to factory defaults, etc. The PARAMETERS drop down menu is used
to adjust software settings such as the KeyKode jam windows, how much
film must pass without reading KeyKode before the INFO CHECK indicator
turns on, whether the field and symbol indicators are shown in the VCG
display, etc.
diagnostics displays on the VCG.
HORIZONTAL
CHAR SIZE = 10
Model 4025 Film Footage Encoder Manual
Selecting an item on one of the drop down menus
The DEBUG drop down menu is to turn on various
CONFIG
CHAR SIZE
TINY
SMALL
LARGE
CHAR STYLE
WHITE
WHITE ON BLACK
BLACK
BLACK ON WHITE
VIDEO STANDARD
AUTO
NTSC
PAL
KK HEAD OFFSET
HEAD OFFSET SUMMARY
VIDEO DELAY
00 FIELDS
WHITE FLAG
WHITE FLAG OFF
WHITE FLAG ON
WHITE FLAG LINES
START END
10 20
WHITE FLAG OFF
OR TO ADJUST
DISPLAY LEVEL
Page 19