Model 4025 Film Footage Encoder Manual
pages separate from the manual. Figure 8-4 shows how to install the reader head
onto the mounting bracket. Figure 8-5 shows the proper installation of the reader
head assembly onto the telecine feed roller collar.
Figure 8-4: Attaching DigiSync Reader Head to Mounting Bracket
8.6.2. Connecting the Reader Head to the DigiSync Console
Refer to section 3 of the DigiSync manual for information on connecting the reader
head to the DigiSync console. The cable supplied with the DigiSync is 12 feet
long. If you wish to mount the console more than 12 feet from the telecine,
required, this cable may be extended to a maximum length of 100 feet. When
extending the cable, care should be taken to ensure that shielded cable is used,
and that the shield is connected through.
KEYKODE READER INSTALLATION
Page 8-9