HD9510UC High Definition Upconverter Manual
DISPLAY LEVEL
FACTORY RESET
UPGRADE
FIRMWARE
ACCESS CTRL REGS
3.4.1. Setting The Front Panel Display Brightness
DISPLAY LEVEL
Level 00
3.4.2. Resetting the Upconverter to its Factory Default Values
FACTORY RESET
Resetting....
3.4.3. Upgrading The Firmware Version
UPGRADE
FIRMWARE
ERASE ALERT
Page 3-14
This menu is used to control the brightness of the front panel display.
This menu is used to reset the unit to its factory defaults.
This menu is used to upload new firmware to the Upconverter.
This menu is used to view and change various register values.
The DISPLAY LEVEL menu allows the user to set the brightness of the front
panel display.
Valid values are 0 to 5
The FACTORY RESET menu allows the user to restore the factory default
values to the Upconverter.
Press Select &
↑
to reset the unit
The UPGRADE FIRMWARE menu allows the user to update the firmware in the
Upconverter.
For more information about upgrading firmware see section 4.3.
Revision 1.1.1
OPERATION