Manual Head Offset Adjustments - evertz 4025 Instruction Manual

INSTALLATION
When you press SHIFT + SELECT a second screen appears that allows
you to proceed with manual adjustments or automatic learning.
If you want to perform manual adjustments to the head offset, press the
SHIFT + SELECT keys. The manual adjustment screen appears. If you
are installing the head for the first time, press the SELECT key to proceed
with automatic head offset learning.

2.12.4. Manual Head Offset Adjustments

Improper Head Offsets may cause errors in the footage numbers. Manual
adjustment is best suited for re-entry of previously auto-learned values.
The head offsets can be manually adjusted to fine tune the calibration.
Press the &
keys to adjust by 10. Holding down the keys will increase the adjustment
speed.
Model 4025 Film Footage Encoder Manual
TIMECODE FILM
HEAD OFFSET ADJUSTMENT
SELECT TO LEARN
SHIFT + SELECT TO ADJUST
CLR TO RETURN TO SUMMARY
TIMECODE FILM
HEAD OFFSET FOR 35 MM 24 FPS
OFFSET NONE
SHIFT+ TO ADJUST OFFSET
HOLD KEYS DOWN TO ADJUST FASTER
keys to adjust by 1. Press the SHIFT+
CONFIG
CONFIG
ERROR 000 : 00
& SHIFT+
Page 2-28