evertz 4025 Instruction Manual page 79

OPERATION
PAL GEN-LOCK
PAL video reference. If it is blinking, it indicates that the PAL
video standard is selected, but a valid PAL video reference is
not present.
NTSC GEN-LOCK
NTSC video reference.
NTSC video standard is selected, but a valid NTSC video
reference is not present.
FRAME Indicates that the 4025 has detected the presence of a valid film
frame pulse from the telecine. If the 4025 is not set for the
same video standard and film transfer rate as the incoming film
frame pulse, this LED will be OFF.
LOCK Indicates that the telecine has achieved a stable play speed and
that the 4025 is properly locked to the telecine's transfer
sequence.
To ensure proper operation of the 4025, the GEN-LOCK, FRAME & LOCK
indicators MUST be solidly on during the film to tape transfer.
COMM Indicates that a data packet has been sent to a logging
computer.
ERROR Indicates that a system error has occurred. Press the HELP key
to see further information about the nature of the error.
Model 4025 Film Footage Encoder Manual
Figure 0-5: System Status Indicators
Indicates that the unit is properly gen locked to a
Indicates that the unit is properly gen locked to a
If it is blinking, it indicates that the
Page 13