Table of Contents
Advertisement
Model 4025 Film Footage Encoder Manual
modes such as KeyKode Jam, film type, film transfer rate, etc.
The
CONFIG drop down menu is used to configure miscellaneous items such
as video standard, character size and style, KeyKode head offset, video
path delays, etc.
To enter the Format menus, press the FORMAT key.
The character
generator will show the last drop down menu that was used with the
currently selected item highlighted. The two horizontal arrow keys (
,
)
allow you to move horizontally to another drop down menu. Using these
two keys you can quickly scan the entire menu system for the item you
wish to change.
The two vertical arrow keys ( ,
) allow you to move vertically within the
drop down menus. When you have selected the desired menu item, press
the SELECT key to reveal the sub menu choices for that item. Use the two
vertical arrow keys ( ,
) to move vertically within the sub menu. When
you have selected the desired sub menu choice press the SELECT key to
save your choice and you will return to the drop down menu.
When you have made all the desired changes, press the FORMAT or CLR
keys to return to the normal display mode.
Each of the menu items are described in the following sections, with an
explanation of what each choice does. Section 3.3 describes the items on
the TIMECODE drop down menu. Section 3.4 describes the items on the
FILM drop down menu. Section 3.5 describes the items on the CONFIG
drop down menu.
OPERATION
Page 18
Advertisement
Table of Contents
