Table of Contents
Advertisement
SYSTEM DIAGNOSTICS
Improper Setups
35MM KK MISMATCH 16MM MODE
16MM KK MISMATCH 35MM MODE
16MM KK MISMATCH 16(40)MODE
UNKNOWN KK TYPE
35MM/24FPS HEAD OFFSET ZERO
35MM/30FPS HEAD OFFSET ZERO
16MM/24FPS HEAD OFFSET ZERO
16MM/30FPS HEAD OFFSET ZERO
KeyKode Related Messages
KK JAM: FEET DIFFERS
KK JAM: FRAMES DIFFERS
KK JAM: KEY INFO DIFFERS
KK JAM: PREFIX DIFFERS
KEYKODE OFF
KEYKODE MISSING
KEYKODE INVALID
RX INTERRUPT OVERLAP
RX UNEXPECTED INTERRUPT
Model 4025 Film Footage Encoder Manual
The incoming 35mm KeyKode data does not
match the selected 16mm mode.
The incoming 16mm KeyKode data does not
match the selected 35mm mode.
16mm KeyKode should be used with 16(20)
mode and not 16(40) mode.
An unknown KeyKode data type has been
received. The 4025 only accepts KeyKode
numbers which physically occur on the film.
Interpolated values are not accepted.
The head offset for 35mm 24fps has not yet
been initialized.
The head offset for 35mm 30fps has not yet
been initialized.
The head offset for 16mm 24fps has not yet
been initialized.
The head offset for 16mm 30fps has not yet
been initialized.
Indicates why the KeyKode was used to update
the edge numbers.
Indicates KK JAM = OFF has been selected.
Bi-phase is indicating that the telecine is in
motion but no KeyKode is being received.
An illegal or invalid KeyKode combination has
been selected, usually this message is replaced
by more specific messages.
Please call us if you get this message.
Indicates an unexpected receive interrupt has
occurred on the KeyKode serial port.
Page 5-4
Advertisement
Table of Contents
