Table of Contents
Advertisement
5.10. MODULE LED DISASTER CODES
5.11. VCG RAM DUMP
SYSTEM DIAGNOSTICS
5.
To exit RAM view mode press SHIFT+*. Then select the RAM view
item from the tool box menu and turn it off.
In the event that a fatal error is detected on one of the modules, the LED's
that are on that module will blink in a regular pattern. The repetition pattern
of the blinking is a code which indicates the nature of the error. You may
be asked for this information from an Evertz Technical Support person.
During some field diagnostics you may be asked by an Evertz Technical
support person to do a RAM Dump to the character inserter, to print it out
using a video printer and fax it to Evertz.
information is not important to the user but only to Evertz Engineering
personnel. To perform the VCG RAM Dump, press the TIME/UB + SHIFT
+ FORMAT keys. A full screen display showing the 631 internal RAM
values appears. When you have printed this screen using a video printer,
press the SELECT key to display the next screen. When the 4025 has
accumulated all the values for the 615 board it will prompt you to PRINT
and SELECT. After video printing, press the SELECT key to proceed to
the 611 display. When it is ready, print out the screen and press the
SELECT key to return to normal operating mode.
Model 4025 Film Footage Encoder Manual
The exact content of this
Page 5-12
Advertisement
Table of Contents
