Table of Contents
Advertisement
OPERATION
Figure 0-4: Function Pushbutton Group
The function key group consists of eight keys and is used for controlling
frequently used functions of the 4025. These keys are coloured RED to
indicate that they affect the operation of the unit and should be used with
caution.
CHAR GEN MODE Initiates VCG window select mode and highlights the
selected window. Use the arrow keys to move the window, use
the CHAR GEN ON / OFF key to turn the window on or off.
Pressing the MODE key again selects the next VCG window,
etc. Press CLR to exit the window select mode.
CHAR GEN ON / OFF Turns the character generator ON and OFF. When
in the VCG window select mode, it is used to turn individual
windows ON and OFF.
CONFIG A user configuration screen appears which is used to load and
store user definable configurations.
corresponding to the desired configuration to load it or press
SHIFT + a numbered key to save the current configuration.
GEN RUN / HOLD Alternately starts and stops the generator time when
the generator is in the RUN EDGE mode.
HELP
Displays error messages from the last error on the character
inserter.
STATUS Displays a status screen on the VCG which summarizes the
current
operational
SHIFT + STATUS displays the firmware versions of each
module installed in the 4025 on the character generator screen.
VITC
Turns the VITC generator ON and OFF. A status indicator to
the left of this key shows whether the VITC generator is On or
Off.
3.1.5
Model 4025 Film Footage Encoder Manual
modes
of
Press a numbered key
the
4025.
Pressing
Page 10
Advertisement
Table of Contents
