evertz 4025 Instruction Manual page 54

INSTALLATION
Make sure that the reference frame is properly framed in the gate. Press
SELECT to proceed.
Enter the film edge number of the reference frame into the 4025 using the
ENTER and numeric keys. The frame number will be in inverse video
when you are in entry mode. Normally the reference frame number will
have a +00 frame offset from the key number for 16 mm and +00 or +08 for
35 mm. Press ENTER to complete the reference frame number entry
mode. Attempting to enter illegal frame numbers will cause the display to
return to the last valid frame entry. Press SELECT to continue.
If you have entered a frame number with a non-standard frame offset, you
must press SHIFT + SELECT to continue, or press ENTER to re-enter
another value.
Entering the wrong reference frame number will cause the automatic head
offset learning to fail. Make sure you have entered the correct reference
frame number before proceeding.
Model 4025 Film Footage Encoder Manual
TIMECODE FILM
HEAD OFFSET FOR 35 MM 24 FPS
PARK FILM ON REFERENCE FRAME
WAITING FOR STOP
TIMECODE FILM
OFFSET FOR 35 MM 24 FPS
FILM IS STOPPED
PRESS SELECT WHEN FILM IS
PARKED ON REFERENCE FRAME
CONFIG
CONFIG
Page 2-30