Table of Contents
Advertisement
3.8.16. Resetting the 8010-SIE to Factory Defaults
FACTORY RESET
Shift+sel=reset
3.8.17. Displaying the 8010-SIE Software version
SOFTWARE VERSION
DG86D9.M R020822
3.9.
GLOBAL POSITION SYSTEM OPERATION (MODEL 8010-SIE-GPS II ONLY)
The 8010-SIE-GPS II is supplied with a Trimble Accutime 2000 GPS Smart Antenna that houses the
GPS receiver, antenna, power supply and other support circuitry in a sealed, shielded, self-contained
unit with a digital interface to the 8010-SIE-GPS II. See section 2.9 for information on mounting the
antenna and connecting it to the 8010-SIE-GPS II.
3.9.1. Setting the GPS Time Reference Mode
To operate the 8010-SIE-GPS II in its GPS based time mode select the GPS SID mode from the GEN
SRC ID MODE menu. (See section 3.5.2 for information about setting the GEN SRC ID MODE)
When the 8010-SIE-GPS II is operating in the 525 line video standard, it will automatically
switch to the Drop Frame mode so that it's time base is as close as possible to real time.
The front panel display will show a sequence of messages, indicating the status of the GPS receiver.
The most common messages you will see are:
GPS STS:
GPS STS:
GPS STS: 1 SV FIX
GPS STS: 2 SV FIX
GPS STS:
GPS STS: GET TIME
GPS STS: GET PPS
While this message is being shown, the 8010-SIE-GPS II is acquiring the time and date information and
synchronizing its internal UTC clock to the receiver time and timing pulses. Once stable timing pulses
are detected from the antenna, and synchronization is complete, the GPS LOCK indicator will go on.
After synchronization has been achieved, the 8010-SIE-GPS II's colour framing circuitry will adjust the
OPERATION
The FACTORY RESET menu item is used to return the 8010-SIE to its
factory defaults. When you press the
Shift+sel=reset. When you press SHIFT + SELECT the 8010-SIE will
reload its factory defaults and show the message
Reset done
The SOFTWARE VERSION menu item is used to display the 8010's
software version. When you press the
the software version which will be something like:
DG86D9.M R020822
NO FIX
indicates no satellite position fixes yet
NO SATS
indicates no usable satellites yet
1 satellite vector fixed
2 satellite vectors fixed
FIXING
obtaining 2 dimensional position fix
getting time from receiver
getting timing pulses from receiver
Model 8010-SIE Digital Source ID Encoder Manual
Revision 2.2
or
keys, the display shows
or
keys, the display shows
Page 3-28
Advertisement
Table of Contents
