Restoring The Graticule Generator To Its Factory Defaults - evertz HD9690 Series Instruction Manual

To lock one of the presets using the desktop remote panel, press the ESC and PRESET SAVE buttons at
the same time. The control panel display will show Protect preset #. Select the location you wish to
lock using the SHIFT LOCK and USER PRESET buttons. The control panel display will show Confirm
lock n. To confirm the locking of this preset press the PRESET SAVE button. The control panel display
will show the message Preset n locked.
PRESET SAVE buttons at the same time. The control panel display will show Protect preset #.
Select the location you wish to unlock using the SHIFT LOCK and USER PRESET buttons. The control
panel display will show Confirm unlock n.
PRESET SAVE button. The control panel display will show the message Preset n unlockd.
5.6.

RESTORING THE GRATICULE GENERATOR TO ITS FACTORY DEFAULTS

The HD9690 can be restored to its factory default condition using the following procedure.

All menu settings and user presets will be over written by this process. Proceed
with caution.
To reset the Graticule generator to its factory defaults using the integrated front panel or the rack mount
remote panel press and hold the USER PRESET 9 button and then press the KEYER ON/OFF button at
the same time. To reset the Graticule generator to its factory defaults using the desktop remote panel
press and hold the AUTO ASPECT button and then press the ESC button at the same time. The control
panel will display Clear presets? To confirm the erasing of user settings press the PRESET SAVE
button. The control panel will show the message clearing presets while the user settings are being
erased. The HD9690 will go through a reboot cycle to load the factory defaults into the unit.
TECHNICAL DESCRIPTION
HD9690 Series HDTV Graticule Generator Manual
To unlock one of the presets press the ESC and
To confirm the unlocking of this preset press the
Revision 1.5
Page 5-13