Adjusting The Front Panel Display Brightness; Resetting The 5950-Sid To Its Factory Defaults - evertz 5950-SID Instruction Manual

DISPLAY LEVEL
DISPLAY LEVEL = 2
$ TO ADJUST
#
FACTORY RESET
** WARNING **
THIS
COMPLETELY
RESETS UNIT
USE TIME/UB +
SELECT
TO PROCEED
OPERATING INSTRUCTIONS
Model 5950-SID VITC Reader / Source ID Decoder Manual

3.7.3. Adjusting the Front Panel Display Brightness

The DISPLAY LEVEL menu item is used to adjust brightness of the front
panel display. Use the # & $ keys to adjust.

3.7.4. Resetting the 5950-SID to its Factory Defaults

The FACTORY RESET menu item is used to reset the 5950-SID to the
factory default parameters. Press the TIME/UB + SELECT keys when the
sub menu screen is displayed to reset the 5950-SID to factory defaults.
The 5950-SID will perform a power-on configuration before returning to the
normal operating mode.
Page 3-13