Traction Drive Drum And Bearing Housing Assembly - Textron JACOBSEN Eclipse 2 Technical/Repair Manual

POWER TRAIN
Traction Drive Drum and Bearing
Housing Assembly
Removal and Installation
See Figures 5-16 through 5-19.
1. Park the mower safely. (See "Park Mower Safely" on
page 1-5.)
2. Remove traction drive belts. (See "Traction Drive
Belts" on page 5-7.)
3. Remove right-side brake band. (See "Park Brake
Band" on page 7-8.)
2 3
1
5
6 7
4. Remove screw (6), lock washer (7), spacer (5), and
nut (8) from the brake bracket (1).
5. Remove screw (2), lock washer (3), and spacer (4),
and remove brake bracket (1).
5-10
5
8
Figure 5-16
9
14
4
6. Support the traction drive drum (13).
7. Remove key (9) from traction drum shaft (14).
8. Remove two screws (11) and lock washers (12) from
bearing housing (10).
TN0665
15
9. Remove nut (15) and pulley (16).
11 12
10
13
Figure 5-17
Figure 5-18
4262930-Rev A
TN0823
16
TN0821