6.5
Mounting / dismantling
6.5.1
Installation sites
Fig. 11: Installation sites
When selecting the installation location, ensure that there is a distance to sources of heat or
■
cold.
Heat or cold sources influence the function of the internal temperature sensor.
■
The device should be mounted on a wall opposite the heat source. The distance to side
■
walls or door frames should be at least 50 cm. The distance to the floor should be about 150
cm.
■
Do not mount the device on an exterior wall. Low outside temperatures have an effect on
the temperature regulation.
■
The device must not come into direct contact with liquids.
■
Do not mount the device in direct sunlight, near radiators, windows, light sources or behind
curtains.
Mounting height
Fig. 12:
Mounting height
The mounting height is 1.50 m.
■
Product manual 2CKA001473B5472
Connection, installation / mounting
│31