System Settings - Firmware Update; System Settings - Via - Busch-Jaeger SD/U12.55.11-825 Manual

10.5.7

System settings - Firmware update

Software updates are performed with the aid of the SD card.
Fig. 37: Firmware update via SD card
1. Change to the "Firmware update" menu under system settings.
2. Tap on the "Update via SD card" button.
– The system then searches for available updates. If there is a new update on the SD
card, it will be listed in the dialogue.
3. Select the file by activating the checkbox.
4. Tap on the "Install update" button.
– The update is carried out.
– The successful installation is displayed in the dialogue. The display is then restarted
independently.
10.5.8

System settings - Via

This page provides general system information.
Product manual 2CKA001473B5472
Operation
│269