Basic Settings (System Settings) Of The Panel - Busch-Jaeger SD/U12.55.11-825 Manual

7.6.1

Basic settings (system settings) of the panel

Notice
Entries in text fields must be confirmed with the return key.
Time and date
Automatic summer/winter time changeover
■
Options:
The parameter is used to specify whether the changeover between summer and winter time is
to be made automatically.
First day of the week
■
Options:
The parameter is used to specify the first weekday.
Lat. [dd.dd][+ = North, − = South]
■
Options:
The parameter is used to set the geographic latitude for the location of the device (90° North to
90° South)
This setting is important for the astro function.
Notice
Whether a dot or a comma is to be used as decimal separator depends on the
system. If a wrong separator is used, the decimal places cannot be entered as
desired, or the value entered is replaced by a standard value after the entry.
If the entry is made in decimal degrees for example, the angular minutes are specified as
number of decimal places: 1 degree corresponds to 60 minutes.
Example:
51° 14' 53" North (51 degrees, 14 minutes and 53 seconds North) = 51.25 decimal degrees
Example of calculation:
53' (seconds) divided by 60 = 0.88' (minutes)
14' (minutes) + 0.88' (minutes) = 14.88' (minutes)
14.88' (minutes) divided by 60 = 0.248' (degrees)
51° (degrees) + 0.248° (degrees) = 51.248° (degrees)
Notice
Negative values are entered with a minus character.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Activated
Deactivated
Saturday
Sunday
Monday
Setting option from +90.00 to -90.00
│44