Additional Switch Status Object; Manner Of Dimming - Busch-Jaeger SD/U12.55.11-825 Manual

8.3.5

Additional switch status object

Options:
Deactivated:
■
– No additional status object available.
Activated:
■
– An additional 1-bit communication object "Status switch" is enabled. The displayed
value does not originate from the control element. The value is received via a separate
feedback object.
8.3.6

Manner of dimming

Options:
– Start/stop: When the button is pressed a telegram with the information "dim brighter" or "dim
darker" is sent. When the button is released a telegram with the information "stop dimming"
is sent.
Brightness change [%]:
Options:
The parameter is used to specify in which step widths to dim.
Telegram is repeated every [sec.]:
Options:
The parameter is used to specify the space of time between two dimming telegrams.
– Value: The following parameters are displayed:
Brightness change [%]:
Options:
The parameter is used to specify in how many stepless steps dimming takes place.
Telegram is repeated every [sec.]:
Options:
The parameter is used to specify the space of time between two dimming telegrams.
Product manual 2CKA001473B5472
Control elements and application parameter
Activated
Deactivated
Start/stop
Stepwise
Value
Setting option in % (different values)
Setting option from 0.25 - 1.25 seconds
Setting option in % from 1 - 20
Setting option from 0.25 - 1.25 seconds
"Dimmer" control element
│87