Busch-Jaeger SD/U12.55.11-825 Manual page 169

Number of inputs:
■
Options:
The parameter is used to set the number of available inputs. The following parameter is
enabled:
Using value x:
■
Options:
The parameter is used to specify whether the signal is used for the conversion into text.
Deactivated:
■
– No additional parameters available.
Activated:
■
– The following parameter appears:
Text for value x:
■
Options:
Naming of the value. The length of the text is limited to 15 characters.
Notice
How many "Use value x" parameters and "Text for value x" are
displayed depends on the setting of the "Number of inputs" parameter.
1 byte -> text:
■
– A 1-byte value is converted into text. The following parameter is enabled:
Number of texts:
■
Options:
The parameter is used to set the number of values to be converted into text. The following
parameters are displayed:
Text x for value [0 - 255]:
■
Options:
The parameter is used to set which value is to be converted into text x.
Text x:
■
Options:
Naming of the value. The length of the text is limited to 15 characters.
1 byte -> 8x1 bit:
■
– A 1-byte value is converted into eight 1-bit values. The following parameter appears:
Product manual 2CKA001473B5472
Control elements and application parameter
Setting options from 1 - 4
Deactivated
Activated
<Text>
Setting options from 1 - 16
Setting options from 0 - 255
<Text>
Application "Logical functions"
│169