2.2
Intended use
The displays are multifunctional room control displays for visualizing and operating building
functions in Busch-Installationsbus
The devices are available as frame-based and single displays (ranging from 2.4" to 4.0"). The
frame of the design range must be installed with the 2.4'' display (e.g. solo, future, axcent, etc.).
The devices are intended for the following:
Operation according to the listed technical data
■
Installation in dry interior rooms
■
Use with the connecting options available on the device
■
The intended use also includes adherence to all specifications in this manual.
2.3
Improper use
Each use not listed in "Intended use" on page 14 is deemed improper use and can lead to
personal injury and damage to property.
Busch-Jaeger is not liable for damages caused by use deemed contrary to the intended use of
the device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
Unauthorized structural changes
■
Repairs
■
Outdoor use
■
The use in bathroom areas
■
Insert with an additional bus coupler
■
Product manual 2CKA001473B5472
®
KNX and Busch-free@home
®
systems.
Safety
│14