Dismantling - Busch-Jaeger SD/U12.55.11-825 Manual

6.6

Dismantling

Dismantling is carried out in the reverse order to mounting.
Notice
After mounting with Removal protection for control elements, (See "Removal
protection" on page 32), removal protection, dismantling is then only possible
with Removal protection tool TZW/U.0.11.CK!
For dismantling with Removal protection for control elements, carry out the following steps:
Fig. 15: Dismantling with removal tool
1. Guide the Removal protection tool tool down behind the device to the limit stop.
2. Remove the device.
Product manual 2CKA001473B5472
Connection, installation / mounting
│35