Busch-Jaeger SD/U12.55.11-825 Manual page 50

Activate communication object "Deactivate proximity" 1 bit
■
Options:
The parameter is used to activate the "Deactivate proximity" communication object.
Temperature
Notice
The temperature parameters refer to the temperature display in the top bar of
the display.
Unit of temperature
■
Options:
The parameter is used to specify the temperature in the units of °C (Celsius) or °F (Fahrenheit).
Compensating value for temperature measurement (x 0.1K) [K]
■
Options:
The parameter is used to specify the adjustment value for the temperature measurement.
Send indoor sensor temperature
■
Options:
The parameter is used to specify whether or when the temperature values of the indoor sensor
are passed on to other devices.
Cycle time for automatic transmission of the internal sensor temperature [sec.]
■
Options:
The parameter is used to specify the intervals at which the temperature values of the indoor
sensor are passed on to other devices.
Notice
This parameter is only available if parameter "Send indoor sensor temperature"
has been parameterized to "cyclic".
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Activated
Deactivated
°C
°F
Setting option from -128 - +127 K
Do not send
On change
Cyclic
On change and cyclic
Setting option from 5 - 3600 seconds
│50