Fault And Alarm Messages - Busch-Jaeger SD/U12.55.11-825 Manual

10.3.3

Fault and alarm messages

The display offers protection and information via the notification center. This enables you to
view information about malfunctions or faults. Message contacts, sensors and their functionality
can be monitored. The messages desired in case of a fault or an alarm can be set individually
(see chapter 7.10 "Configuration of applications and application pages" on page 65).
Notice
Depending on the parameterization, only certain functions are available in the
application
The user can view, acknowledge and delete the call history and messages via the notification
center.
The notification center is called up as follows:
1. Swipe to the right on the start page.
– The application page with the call history and the notifications opens.
Messages
Current and and archived messages can be displayed and edited in the fault and alarm
messages. There are different types of messages. Each category has its own icon.
Information
■
Warning
■
Fault message
■
Fig. 26: Fault and alarm messages
Current fault or alarm messages are marked with a red dot next to the warning icon.
1. The message text can be viewed by tapping on a message.
2. The messages can be shifted into the archive by swiping to the left.
Product manual 2CKA001473B5472
Operation
│256