Setpoint Settings - Reduction For Heating Economy By; Setpoint Settings - Setpoint For Heating Building Protection - Busch-Jaeger SD/U12.55.11-825 Manual

Specifies the comfort temperature for heating economy.
Notice
This parameter is only available when the "Control function" parameter is set
on "Heating", "Heating with additional stage", "Heating and cooling" or
"Heating and cooling with additional stage" and parameter "Setpoint for
standby and Eco are absolute values" is set on "activated".
8.18.79 Setpoint settings — Reduction for heating economy by
Options:
Specifies the temperature in heating mode when nobody is present. On devices with a display,
this mode is indicated by the ECO icon.
Notice
This parameter is only available when the "Control function" parameter is set on
"Heating", "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages" and parameter "Setpoint for standby and Eco are
absolute values" is set on "deactivated".
8.18.80 Setpoint settings — Setpoint for heating building protection
Options:
Function for protecting the building against the cold. On devices with a display, this mode is
indicated by the frost protection icon. Manual operation is blocked.
Notice
This parameter is only available when the "Control function" parameter is set on
"Heating," "Heating with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
Product manual 2CKA001473B5472
Control elements and application parameter
Setting option between 0 - 15
Setting option between 5 - 15
Application "Internal RTC"
│201