Haptic feedback
Activate haptic feedback
■
Options:
The parameter can be used to switch the haptic feedback on or off.
Screen saver
Display screen saver [min.]
■
Options:
The parameter is used to specify the duration after which the screen saver is to be displayed.
Screen saver mode
■
Options:
The parameter us used to specify the type of screen saver.
Type of clock
■
Options:
The parameter is used to specify the type of clock.
Notice
The parameter is available only when parameter "Screen saver mode" has been
set on "Timer".
Display of seconds
■
Options:
This parameter is use to deactivate or activate the display of the seconds.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Inactive
Active
No screen saver
5
10
15
30
60
120
Clock
Picture display
Information page
Analogue
Digital
Activated
Deactivated
│51