10.5.5
System settings - Screen saver
Setting the screen saver
A screen saver can be activated if the display is not used. Here you can select between a clock,
slideshow, weather and weather data. If a micro SD card (SDHC) with suitable pictures is in the
device, select a screen saver via the drop-down menu. If there are several pictures on the micro
SD card (SDHC), they are displayed as a slide show.
Fig. 35:
Screen saver
1. The type of screen saver can be selected by swiping to the top and bottom. The following
selection options are available:
–
Clock
–
Slide show
–
Information page
2. A time delay up to the triggering of the screen saver can be set.
3. Then, if necessary, a time delay up to the switch-off of the display can be set.
–
Activate the checkbox additionally when the display is to switch off already after a brief
period.
Picture requirements for slideshow
■
■
■
Further setting options for the screen saver "Slide show".
Transfer effect (press from right, fade out)
■
Picture display interval (5 to 120 seconds)
■
Display order (random, alphabetical)
■
Product manual 2CKA001473B5472
The pictures must be stored on the micro SD card (SDHC) on the first level
in the "Picture" directory.
The maximum permissible size of a picture is 3 MB.
The supported format is "jpg".
Operation
│267