Busch-Jaeger SD/U12.55.11-825 Manual page 146

Sensor type
■
Options:
The temperature sensor type is selected via the parameter.
Notice
The parameter is only available when the setting "As temperature input" is used
during the parameterization of binary input under "Use binary input".
Temperature offset [x0.1°C]
■
Options:
The temperature offset is selected via the parameter.
Notice
The parameter is only available when the setting "As temperature input" is used
during the parameterization of binary input under "Use binary input".
Line fault compensation
■
Options:
The line fault compensation is selected via the parameter.
Line resistance (sum of forward and return conductor) [mOhm]
■
Options:
Line length, single distance [m]
■
Options:
Cross section of wires, value x 0.01 [mm2]
■
Options:
Product manual 2CKA001473B5472
Control elements and application parameter
Pt1000
6226/T
Setting option from -5 - 5
Resistance
Length
None
Setting option from 0 - 10000
Notice
– The parameter is only available if the parameter "Line fault
compensation" is set on "Resistance".
Setting option from 1 - 30
Notice
– The parameter is only available if the parameter "Line fault
compensation" is set on "Length".
Setting option from 1 - 150
Application "Inputs"
│146