Busch-Jaeger SD/U12.55.11-825 Manual page 53

Primary function
Notice
The primary function is triggered by touching the display with 3 or more fingers.
Use of primary function
■
Options:
The checkbox is used to specify whether the primary function is to be activated or deactivated.
Icon for primary function
■
Options:
The parameter is used to specify the icon for the primary function.
Object type
■
Options:
The parameter is used to specify the object type.
Reaction to pressing
■
Options:
The parameter is used to specify the reaction behaviour to pressing.
Reaction to release
■
Options:
The parameter is used to specify the reaction behaviour to release.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Activated
Deactivated
<Icon>
1 bit
1-byte value [0 - 100%]
1-byte value [0 - 255%]
Number of scene [1 - 64]
RTC operating mode [1 byte]
Value 1
Value 2
Alternating value 1/value 2
Inactive
Value 1
Value 2
Alternating value 1/value 2
Inactive
│53