Busch-Jaeger SD/U12.55.11-825 Manual page 162

The values for sending output telegrams can be set individually for each output via a
corresponding parameter. "On" or "Off" can be set for 1-bit outputs. Values from 0 to 255 can be
specified for 1-byte outputs.
The following parameters are enabled:
Start requirements:
■
Options:
See the explanation above.
1 Bit:
■
– The following parameter is enabled:
Start command:
■
Options:
See the explanation above.
1 byte:
■
– The following parameter is enabled:
Start command:
■
Options:
See the explanation above.
Telegram delay:
■
Options:
The parameter is used to set the time delay for telegrams.
Used outputs:
■
Options:
The parameter is used to set the number of output objects to be used in the "Multiplier"
application.
Object type output x:
■
Options:
The parameter is used to specify whether the output object consists of a 1-bit value (0/1) or a 1-
byte value (in percent).
Notice
How many "Object type output x" parameters are displayed depends on the
setting of the "Outputs used" parameter.
1 bit:
■
– The following parameter is enabled:
Product manual 2CKA001473B5472
Control elements and application parameter
1 bit
1 bytes
OFF - telegram
ON - telegram
Setting options from 0 - 255
Setting option from 200 ms - 10 seconds
Setting options from 1 - 10
1 bit
1 byte [0 - 100%]
Application "Logical functions"
│162