Editing Communication Objects - Busch-Jaeger SD/U12.55.11-825 Manual

7.11

Editing communication objects

The available communication objects of the marked control elements (see work area) are listed
in the "Communication objects" area. They can here be selected and edited directly via the
ETS. The same applies to several applications (see library area).
Notice
Detailed expert knowledge for understanding by means of KNX training is
assumed, especially with regard to the ETS commissioning software.
Fig. 20: Communication objects area
To establish the connection between a control element and a sequence, for example, you must
assign a group address to the communication object in the ETS. Each control element has
several communication objects for this purpose.
Allocating a group address to a control element:
1. Pull a group address out of the group address window onto a communication object with the
left mouse button.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
│69