Busch-Jaeger SD/U12.55.11-825 Manual page 165

1-byte value [0 - 255]:
■
– A value is sent as 1-byte value without a sign, e.g. actuating value, angle or brightness
value. No additional parameters available.
1-byte value [-128 - 127]:
■
– A value is sent as 1-byte value with a sign, e.g. actuating value. No additional
parameters available.
Scene number:
■
– The parameter is used to link the channel with a scene number. No additional
parameters available.
RTC operating mode:
■
– After actuating the control element the device switches to the parameterized operating
mode. No additional parameters available.
Temperature:
■
– After the control element is actuated, the device sends the parameterized temperature
value. No additional parameters available.
2-byte value [-32768 - +32767]:
■
– A value is sent as 2-byte value with a sign, e.g. actuating value or time difference. No
additional parameters available.
2-byte value [0 - 65535]:
■
– A value is sent as 2-byte value without a sign, e.g. actuating value or time interval. No
additional parameters available.
2-byte floating point:
■
– A value is sent as 2-byte floating point value, e.g. a temperature value, a time duration,
a power or a consumption value. No additional parameters available.
4-byte value [-2147483648 - 2147483647]:
■
– A value is sent as 4-byte value with a sign, e.g. actuating value or time difference. No
additional parameters available.
4-byte value [0 - 4294967295]:
■
– A value is sent as 4-byte value without a sign, e.g. actuating value. No additional
parameters available.
14-byte text:
■
– Makes it possible to send a text. No additional parameters available.
Saving input signal during blocking:
■
Options:
See the explanation above.
Temperature comparator:
■
– This function can be used to compare temperature values. The following parameters are
enabled:
Product manual 2CKA001473B5472
Control elements and application parameter
Deactivated
Activated
Application "Logical functions"
│165