Reaction to releasing/opening
■
Options:
–
The parameter is used to select the reaction on releasing/opening.
Notice
The parameter is only available when the setting "As binary input" is used during
the parameterization of binary input under "Use binary input".
Value 1
■
Options:
The parameter is used to switch value 1 on.
Value 2
■
Options:
The parameter is used to switch value 2 on.
Value 1
■
Options:
The parameter is used to select the percentage value for the value 1.
Product manual 2CKA001473B5472
Control elements and application parameter
Value 1
Value 2
Alternating value 1/value 2
Inactive
Off
One
Notice
–
The parameter is only available if the "Object type" parameter is set on
"1-bit".
–
The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 1" or on
"Alternating value 1/value 2".
Off
One
Notice
–
The parameter is only available if the "Object type" parameter is set on
"1-bit".
–
The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 2" or on
"Alternating value 1/value 2".
Setting option from 0 - 100%
Notice
–
The parameter is only available if the "Object type" parameter is set on
"1-byte value [0..100]".
–
The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 1" or on
"Alternating value 1/value 2".
Application "Inputs"
│142