Status Control Element (Icon/Text) Is Operated Via A Separate Object; Icon For On; Icon For Off; Enable 1-Bit Communication Object "Disable - Busch-Jaeger SD/U12.55.11-825 Manual

8.1.7

Status control element (icon/text) is operated via a separate object

Options:
An additional 1-bit communication object "Status" is enabled via the parameter.
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
8.1.8

Icon for On

Options:
The parameter is used to specify the icon for On that is shown on the display.
8.1.9

Icon for Off

Options:
The parameter is used to specify the icon for Off that is shown on the display.
8.1.10

Enable 1-bit communication object "Disable"

Options:
There is the option of temporarily disabling the function via an additional communication object
"Disable".
Product manual 2CKA001473B5472
Control elements and application parameter
Deactivated
Activated
<Icon>
<Icon>
No
Yes
"Switch" control element
│79