Sensitivity of the proximity function
■
Options:
The parameter us used to specify the sensitivity of the proximity function (1 = near, 3 = max.
distance).
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" is activated.
Use 1-bit output object of proximity function
■
Options:
When the checkbox is activated, a 1-bit output object of the proximity function is used.
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" is activated.
Switch-on value
■
Options:
The parameter is used to set the switch-on value of the proximity sensor.
Notice
The parameter is only available if the parameters "Use approximation to switch
on the display" and "Use 1-bit output object of proximity function" are activated.
Switch-off value
■
Options:
The parameter is used to set the switch-off value of the proximity sensor.
Notice
The parameter is only available if the parameters "Use approximation to switch
on the display" and "Use 1-bit output object for proximity function" are activated.
Notice
When activated, the switch-off value is first sent when the panel switches into
the standby mode.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
1
2
3
Activated
Deactivated
Off
On
Off
On
│49