Application "Scene Actuator - Busch-Jaeger SD/U12.55.11-825 Manual

7.10.3

Application "Scene actuator"

This application has no application page. The scene actuators are started via the "Scene"
control element. The application serves for compiling a scene.
The scene actuators can be created via the DCA.
1. Open the "Applications" tab in the library area.
2. Open "Scene actuator".
Notice
Individual scene actuators can be created. These can also be added via the
work area.
–
–
–
Further setting/selection options via the "Parameter" area for the settings of the scene
■
actuators, see chapter 8.16 "Application "Scene actuator"" on page 154.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Here a page with a plus is displayed. This page must be clicked. This is how
a further scene actuator is added and displayed in the tree structure.
If the scene actuator is called up via the tree structure, the settings can be
adjusted for the individual scene actuators in the "Parameter" area.
By clicking the arrow next to "Scene actuator", all available scene actuators
are displayed.
│66