Table of Contents
Advertisement
7.1.2
Installation of the ETS app
A special Device Control App (DCA) is to be installed in the ETS for the configuration and
parameter setting of the control elements. The DCA is called up in the device settings of the
ETS. There it can be called up as additional tab. The app can only be used with a licensed ETS
professional. At least version ETS5 version 5.7.7 is required.
Notice
■
■
■
Notice
For the displays Busch-SmartTouch
for the displays RT/U12.xx.11-xxx the DCA „BJE Touch DCA".
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Also ETS6 can be used.
The ETS can be downloaded directly via the homepage of the KNX
organisation (https://knx.org).
The apps are called up as follows:
–
From ETS5 version 5.7.7: on the ETS start page via "App" (bottom right).
–
From ETS6: via the ETS settings.
®
2.4'' the DCA "LC-Display" is to be loaded,
│37
Advertisement
Table of Contents
