Object Type Value 1/2 - Busch-Jaeger SD/U12.55.11-825 Manual

The parameter is used to specify the signals (values) the switch sends to the KNX bus when it
is operated.
– Switchover: No additional parameters available.
–
Press/release:
Notice
–
–
–
Short/long:
Notice
–
–
The following supplementary parameters are available.
8.1.5

Object type value 1/2

Options:
Parameters "Object type value 1" and "Object type value 2" are used to specify the size of the
communication object.
Notice
The parameters are only available when parameter "Type of switching" is set on
"Pressing/releasing" or "Short/long".
– Inactive: No additional parameters available.
– Switch: The following supplementary parameters are available:
Product manual 2CKA001473B5472
Control elements and application parameter
Press = value 1
Release = value 2
Short press = value 1
Long press = value 2
Inactiv
Switch
Forced operation
1-byte value [0% - 100%]
1-byte value [0 - 255]
1-byte value [-128 - 127]
Scene number
RTC operating mode
Temperature
2-byte value [-32768 - +32767]
2-byte value [0 - 65535]
2-byte floating point
4-byte value [-2147483648 - 2147483647]
4-byte value [0 - 4294967295]
14-byte text
"Switch" control element
│75