Icon Type; Status Control Element (Icon/Text) Is Operated Via A Separate Object - Busch-Jaeger SD/U12.55.11-825 Manual

8.2.3

Icon type

Options:
The parameter is used to set whether an icon or a text is displayed.
–
Icons:
Icon for bottom/ value 1:
Options:
The selected icon is displayed when the rocker (button) bottom is actuated.
Icon for top / value 2:
Options:
The selected icon is displayed when the rocker (button) top is actuated.
–
Text:
Text for bottom / value 1:
Options:
The entered text is displayed when the rocker (button) bottom is actuated.
Text for top / Value 2:
Options:
The entered text is displayed when the rocker (button) top is actuated.
8.2.4

Status control element (icon/text) is operated via a separate object

Options:
An additional 1-byte communication object "Status" is enabled via the parameter.
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
Product manual 2CKA001473B5472
Control elements and application parameter
Icons
Text
<Selection of an icon from the list>
<Selection of an icon from the list>
<Text>
<Text>
Activated
Deactivated
Control element "Rocker switch"
│81