Table of Contents
Advertisement
7.1.3
Installation sequence
Notice
The following description of the installation sequence is made on the basis of
version ETS 5.7.7.
The ETS app (*.etsapp file) for the Display is installed and licensed via the ETS. The app can
be downloaded via your My KNX access.
Fig. 16:
ETS app (example illustration)
1. Open the ETS5.
2. Navigate to "Apps" at the bottom right next to "License".
3. Install the desired app via the green plus icon.
–
The app is added to the ETS.
Notice
The displayed apps, the designation and the versions, are only exemplary and
serve only for illustration.
7.1.4
Integrating the display into the ETS
The following steps describe how to integrate the display into the ETS.
1. Start the ETS.
2. Import the product data of the display into the project database via the import function of the
ETS (File type: *.knxprod).
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
│38
Advertisement
Table of Contents
