Busch-Jaeger SD/U12.55.11-825 Manual page 148

Notice
The parameter is only available when the setting "As temperature input" is used
during the parameterization of binary input under "Use binary input".
Output value must be change before sending [°C]
■
Options:
The parameter is used to specify the degree by which the output value is to reduce or rise prior
to the sending of the changed temperature.
Notice
The parameter is only available when the setting "As temperature input" is used
during the parameterization of binary input under "Use binary input".
Product manual 2CKA001473B5472
Control elements and application parameter
Notice
– The parameter is only available if the parameter "The output value
must change before sending" is set on "Only cyclic" or "Cyclic and
on change".
Setting option from 0 - 9.99
Application "Inputs"
│148