Temperature Reading - Adjustment Value For Internal Temperature Measurement Via Object; Temperature Reading - Monitoring Of Temperature Reading; Temperature Reading - Monitoring Time For Temperature Reading - Busch-Jaeger SD/U12.55.11-825 Manual

8.18.113 Temperature reading — Adjustment value for internal temperature measurement via
object
Options:
When the parameter is activated the adjustment value for the internal temperature
measurement is determined via communication object "Temperature calibration - input".
8.18.114 Temperature reading — Monitoring of temperature reading
Options:
The parameter is used to specify whether parameter "Monitoring time of temperature reading" is
available.
8.18.115 Temperature reading — Monitoring time for temperature reading
Options:
If no temperature is read within the parameterised time period, the device switches to error
mode. It transmits a telegram to the bus via the "Actual temperature error" and applies the
operating mode and control value for error.
Notice
This parameter is only available when parameter "Monitoring of temperature
reading" is activated.
Product manual 2CKA001473B5472
Control elements and application parameter
No
Yes, with measured temperature value
Deactivated
Activated
Setting option between 00:01:00 - 18:12:15
Application "Internal RTC"
│210