Setpoint Settings - Setpoint For Cooling Comfort; Setpoint Settings - Setpoint For Cooling Standby; Setpoint Settings - Increase For Cooling Standby By; Setpoint Settings - Setpoint For Cooling Economy - Busch-Jaeger SD/U12.55.11-825 Manual

8.18.81 Setpoint settings — Setpoint for cooling comfort
Options:
Specifies the comfort temperature for cooling when people are present.
Notice
This parameter is only available when the "Control function" parameter is set on
"Cooling" or "Cooling with additional stage" and parameter "Setpoint heating
comfort = setpoint cooling comfort" is set on "deactivated".
8.18.82 Setpoint settings — Setpoint for cooling standby
Options:
Specifies the comfort temperature for cooling during standby.
Notice
This parameter is only available when the "Control function" parameter is set on
"Cooling" or "Cooling with additional stage" and parameter "Setpoint heating
comfort = setpoint cooling comfort" is set on "deactivated".
8.18.83 Setpoint settings — Increase for cooling standby by
Options:
Specifies the temperature in cooling mode when nobody is present. On devices with a display,
this mode is indicated by the standby icon.
Notice
This parameter is only available when the "Control function" parameter is set on
"Cooling", "Cooling with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages" and parameter "Setpoint for standby and Eco are
absolute values" is set on "deactivated".
8.18.84 Setpoint settings — Setpoint for cooling economy
Options:
Specifies the comfort temperature for cooling economy.
Notice
This parameter is only available when the "Control function" parameter is set on
"Cooling" or "Cooling with additional stage" and parameter "Setpoint heating
comfort = setpoint cooling comfort" is set on "deactivated".
8.18.85 Setpoint settings — Increase for cooling economy
Options:
Specifies the temperature in cooling mode when nobody is present. On devices with a display,
Product manual 2CKA001473B5472
Control elements and application parameter
Setting option between 10 - 40
Setting option between 10 - 40
Setting option between 0 - 15
Setting option between 10 - 40
Setting option between 0 - 15
Application "Internal RTC"
│202