Busch-Jaeger SD/U12.55.11-825 Manual page 45

Long. [ddd.dd][+ = East, − = West]
■
Options:
The parameter is used to set the geographic longitude for the location of the device (180° East
to 180° West)
This setting is important for the astro function.
Notice
Whether a dot or a comma is to be used as decimal separator depends on the
system. If a wrong separator is used, the decimal places cannot be entered as
desired, or the value entered is replaced by a standard value after the entry.
If the entry is made in decimal degrees for example, the angular minutes are specified as
number of decimal places: 1 degree corresponds to 60 minutes.
For example:
7°36' 13' East (7 degrees, 34 minutes 13 seconds East) = 7.60 decimal degrees
Example of calculation:
13' (seconds) divided by 60 = 0.22' (minutes)
36' (minutes) + 0.22' (minutes) = 36.22' (minutes)
36.22' (minutes) divided by 60 = 0.603' (degrees)
7° (degrees) + 0.603° (degrees) = 7.603° (degrees)
Notice
Negative values are entered with a minus character.
Select the time zone
■
Options:
The parameter is used to specify which time zone is valid for the display.
General
Panel language
■
Options:
The panel language of the device can be freely set. A selection between 19 different languages
can be made.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Setting option from +180.00 to -180.00
(UTC - 12:00) International Date Line West
...
(UTC+01:00) Amsterdam, Berlin, Bern, Rome, Bern, Stockholm, Vienna
...
English
German
Spanish
...
│45