Busch-Jaeger SD/U12.55.11-825 Manual page 54

Value x Off / On
■
Options:
The parameter is used to set type of the value during pressing or releasing.
Notice
The parameter is only available,
–
–
Value x (0 - 100%)
■
Options:
The parameter is used to set type of the value during pressing or releasing.
Notice
The parameter is only available,
–
–
Value x (1 - 64)
■
Options:
The parameter is used to set type of the value during pressing or releasing.
Notice
The parameter is only available,
–
–
Value x RTC operating mode
■
Options:
The parameter is used to set type of the value during pressing or releasing.
Notice
The parameter is only available,
–
–
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
Off
On
when the parameter "Response to pressing" and "Response to releasing"
has been activated and the response is at least "Value 1"
when parameter "Object type" has the "1 bit" value
0 - 100
when the parameter "Response to pressing" and "Response to releasing"
has been activated and the response is at least "Value 1"
when parameter "Object type" has the "1 byte" value (0 - 100%)
1 - 64
when the parameter "Response to pressing" and "Response to releasing"
has been activated and the response is at least "Value 1"
when parameter "Object type" has the "Number of scene (1 - 64)" value
Auto
Comfort
Standby
ECO
Frost/heat protection
when the parameter "Response to pressing" and "Response to releasing"
has been activated and the response is at least "Value 1"
when parameter "Object type" has the "RTC operating mode (1 byte)" value
│54