Additional Tools (Functions); Import - Busch-Jaeger SD/U12.55.11-825 Manual

7.13

Additional tools (functions)

You can call up additional tools or functions of the DCA via the DCA icon bar.
7.13.1

Import

1. Click on "Import" in the DCA icon bar, a dialog window with the following entries opens.
– Import master
– Import icon file
Import master
Import of masters of a different panel via .stpl file.
1. Select the appropriate file in the dialogue window.
2. Click on "Open".
– The master is imported and can be used in the project.
Notice
The master file must first be exported from a different device.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
│71