Mounting without cover frame
Mounting without cover frame is possible with the following displays:
RT/U12.86.11-811 4" RoomTouch
■
RT/U12.86.11-825 Busch RoomTouch
■
X
For mounting without cover frame the following steps are necessary:
1. Install the support ring [1] .
2. Connect the wires to the connecting terminals, see chapter 6.4 "Electrical connection" on
page 30.
3. Snap the device [2] into the support ring [1] by hand.
–
Observe the correct alignment [X]!
Notice
The arrows [X] on the back must point upwards.
The device is now fully mounted.
Product manual 2CKA001473B5472
Connection, installation / mounting
®
®
4"
1
2
X
│34