Busch-Jaeger SD/U12.55.11-825 Manual page 167

Sending value when input 1 < input 2:
■
Options:
The parameter is used to specify which output object is sent (ON or OFF) when input 1 is
logically smaller than input 2.
1 byte: The following supplementary parameters are available:
■
Sending value when input 1 > input 2:
■
Options:
The parameter is used to specify which output object is sent when input 1 is logically larger than
input 2.
Sending value when input 1 < input 2:
■
Options:
The parameter is used to specify which output object is sent when input 1 is logically smaller
than input 2.
Telegram is sent at:
■
Options:
A telegram is sent when the selected condition is met.
Cyclic sending of output:
■
Options:
The parameter is used to specify whether the output telegram is sent in cycles.
Deactivated:
■
– No additional parameters available.
Activated: The following parameter is enabled:
■
Cycle time:
■
Options:
The parameter is used to specify the cycle time (hh:mm:ss).
Status converter:
■
– This function is used to convert an input value into a 14-byte text or divide it into several
1-bit telegrams. The following parameters are enabled:
Product manual 2CKA001473B5472
Control elements and application parameter
OFF telegram
ON telegram
Setting options from 0 - 255
Setting options from 0 - 255
Change output
Output 1 is larger than input 2
Output 1 is smaller than input 2
Deactivated
Activated
Setting options from 00:00:01 - 00:30:00
Application "Logical functions"
│167