Busch-Jaeger SD/U12.55.11-825 Manual page 164

Control input:
■
Options:
See the explanation above.
Object type input/output:
■
Options:
The parameter is used to specify the size of the communication object.
Switch:
■
– The following supplementary parameters are available:
Inverting an input:
■
Options:
The parameter is used to specify whether the switching input is inverted.
Filter function:
■
Options:
See the explanation above.
Forced operation:
■
– Management systems can access the device directly via KNX. However, it can also be
specified that one can select manually (forced operation) via buttons. No additional
parameters available.
1-byte value [0% - 100%]:
■
– A value is sent as 1-byte value without a sign (percentage value). No additional
parameters available.
Product manual 2CKA001473B5472
Control elements and application parameter
Activation at OFF
Activation at ON
Switch
Forced operation
1-byte value [0% - 100%]
1-byte value [0 - 255]
1-byte value [-128 - 127]
Scene number
RTC operating mode
Temperature
2-byte value [-32768 - +32767]
2-byte value [0 - 65535]
2-byte floating point
4-byte value [-2147483648 - 2147483647]
4-byte value [0 - 4294967295]
14-byte text
Deactivated
Activated
Do not filter
Filter 0
Filter 1
Application "Logical functions"
│164